一、环境说明:
备份服务器:
1.windows 2003 Enterprise server
2.Bakbone Netvault server V7.1.2 for windows
备份客户端:
1.Bakbone Netvault clinet for solairs 64bit
2.Oracle 8.1.7 for solaris 64bit
3.Bakbone Netvault for oracle rman APM for solaris 64bit
二、软件安装配置流程:
1.安装Bakbone NetVault V7.1.2 server for windows server
2.安装Bakbone NetVault SVDL
3.安装Bakbone NetVault V7.1.2 client for solairs 64bit
4.安装Babbone NetVault Oracle_RMAN_8.1.7&9.0.x_Release_3.701_Solaris_SPARC_32_64_orr3nw2g.npk
5.配置oracle 8i备份
三、具体步骤
1、Bakbone Netvault V7.1.2 server for windows 安装，下载地址：http://www.bakbone.com/products/downloads/。具体安装步骤见软件安装手册，此处不在详述。
2、安装SVDL（Bakbone虚拟带库），软件包名称svd178g.npk 下载地址：http://www.bakbone.com/products/downloads/
3、Bakbone Netvault V7.1.2 client for solaris 安装详见安装手册
4、Bakbone Netvault for oracle rman APMfor solaris 64bit安装详见安装手册,此处不在详述.对于不同版本的oracle软件不一样。详情见兼容手册。
注意：以上安装完成。记得重启服务。不必重启机器。可以通过netvault configurator重启netvault软件的服务
四、对于oracle的模块安装配置
1.软件安装见手册。
2.安装完成请建立lib 的link
a. su - oracle
b.$ cd $ORACLE_HOME
c. $cd lib64
d.$ln -s /usr/netvault/lib/orasbt64.so libobk.so
$ln -s /usr/netvault/lib/orasbt64.so libdsbtsh8.so
注意：对于64bit oracle一定要cd $ORACLE_HOME/lib64,如果$ORACLE_HOME/lib则在备份时会报告如下错误：
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03007: retryable error occurred during execution of command: allocate
RMAN-07004: unhandled exception during command execution on channel c1
RMAN-10035: exception raised in RPC: ORA-19554: error allocating device, device type: SBT_TAPE, devi...
ORA-19557: device error, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
Additional information: 4110
ORA-19511: SBT error = 4110, errno = 0, BACKUP_DIR environment variable is not set
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.DEVICEALLOCATE
Recovery Manager complete.
Program finished with exit status of 1
Unexpected error waiting for /data/oracle/product/8.1.7/bin/rman to completion
Check the Backup Job Logs for other errors
Program finished with exit status of 0
Program finished with exit status of 0
BRIGHT Fatal error: Backup Failed
BRIGHT Job Status: Backup Failed
BRIGHT Finished job 47, phase 1 (instance 3)
3.找开netvaul .选择backup.打开oracle服务器.配置oracle,右击,选择"configure",输入相关项目,帐号必须为sys, system或是俱sysdba权限的帐户才行.图3中的default netvault server推荐一定要真写.当然是你的netvault备份服务器的名称.
[attach]172792[/attach]
[attach]172790[/attach]
4.双击"oracle rman APM",增加一个需要备份的instance ,相关项如下图
[attach]172793[/attach]
5.右击instance "oracle",设置备份用户名和密码,如下图:
[attach]172794[/attach]
[attach]172795[/attach]
注意:此处密码一定要设置,不然在备份时会失败..在日志中会提示如下:
Failed to connect to Oracle. Check account/password on Backup Job.
其他部份:Bakbone NetVault V7.1.2 backup oracle8i for windows(笔记)
http://bbs.chinaunix.net/viewthread.php?tid=868018&extra=page%3D2
此处就不再废话了.
[ 本帖最后由 redwaves 于 2006-12-12 17:57 编辑 ]
38一一 回复于：2006-12-14 10:26:16
做这个动作会跟好一点
"nvpluginaccess"
dodoking 回复于：2007-06-28 13:52:42
好贴要顶，有没有bakbone各种代理的配置手册
redwaves 回复于：2007-06-29 09:59:36
谢顶.哈哈.
emc2665 回复于：2007-06-29 14:58:26
不错！！谢谢！
|
