Iptables default log file (都是常用单词，就不译了吧)
For example, if you type the following command, it will display current iptables log from /var/log/messages file:
引用：# tail -f /var/log/messages
Output:
引用：
Oct 4 00:44:28 debian gconfd (vivek-4435): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Oct 4 01:14:19 debian kernel: IN=ra0 OUT= MAC=00:17:9a:0a:f6:44:00:08:5c:00:00:01:08:00 SRC=200.142.84.36 DST=192.168.1.2 LEN=60 TOS=0x00 PREC=0x00 TTL=51 ID=18374 DF PROTO=TCP SPT=46040 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0
Oct 4 00:13:55 debian kernel: IN=ra0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:18:de:55:0a:56:08:00 SRC=192.168.1.30 DST=192.168.1.255LEN=78 TOS=0x00 PREC=0x00 TTL=128 ID=13461 PROTO=UDP SPT=137 DPT=137 LEN=58
Procedure to log the iptables messages to a different log file
Open your /etc/syslog.conf file:
引用：# vi /etc/syslog.conf
Append following line
引用：
kern.warning /var/log/iptables.log
Save and close the file.
Restart the syslogd (Debian / Ubuntu Linux):
引用：# /etc/init.d/sysklogd restart
On the other hand, use following command to restart syslogd under Red Hat/Cent OS/Fedora Core Linux:
引用：# /etc/init.d/syslog restart
Now make sure you pass the log-level 4 option with log-prefix to iptables. For example:
引用：# DROP everything and Log it
iptables -A INPUT -j LOG –log-level 4
iptables -A INPUT -j DROP
For example, drop and log all connections from IP address 64.55.11.2 to your /var/log/iptables.log file:
引用：
iptables -A INPUT -s 64.55.11.2 -m limit --limit 5/m --limit-burst 7 -j LOG –log-prefix ‘** HACKERS **’ --log-level 4
iptables -A INPUT -s 64.55.11.2 -j DROP
Where,
* –log-level 4: Level of logging. The level # 4 is for warning.
* –log-prefix ‘*** TEXT ***’: Prefix log messages with the specified prefix (TEXT); up to 29 letters long, and useful for distinguishing messages in the logs.
You can now see all iptables message logged to /var/log/iptables.log file:
引用：# tail -f /var/log/iptables.log
[ 本帖最后由 qintel 于 2007-5-15 19:10 编辑 ]
qintel 回复于：2007-05-08 00:30:25
:em11:
我做的贡献就是在转过来的时候，按照原文，把命令都引用起来，和描述分开，看起来方便啊。要在相关行加上
quote和/qoute，这玩艺花了我近20分钟去查sed使用手册:em06:誰叫咱不会用sed呢:em17:
yszll 回复于：2007-06-08 10:35:36
好东西，顶起来！
|
