以KSH为例:
#!/usr/bin/ksh
#
# SCRIPT: 12_ways_to_parse.ksh.ksh
#
#
# REV: 1.2.A
#
# PURPOSE: This script shows the different ways of reading
# a file line by line. Again there is not just one way
# to read a file line by line and some are faster than
# others and some are more intuitive than others.
#
# REV LIST:
#
# 03/15/2002 - Randy Michael
# Set each of the while loops up as functions and the timing
# of each function to see which one is the fastest.
#
#######################################################################
#
# NOTE: To output the timing to a file use the following syntax:
#
# 12_ways_to_parse.ksh file_to_process > output_file_name 2>&1
#
# The actaul timing data is sent to standard error, file
# descriptor (2), and the function name header is sent
# to standard output, file descriptor (1).
#
#######################################################################
#
# set -n # Uncomment to check command syntax without any execution
# set -x # Uncomment to debug this script
#
FILENAME="$1"
TIMEFILE="/tmp/loopfile.out"
>$TIMEFILE
THIS_SCRIPT=$(basename $0)
######################################
function usage
{
echo "\nUSAGE: $THIS_SCRIPT file_to_process\n"
echo "OR - To send the output to a file use: "
echo "\n$THIS_SCRIPT file_to_process > output_file_name 2>&1 \n"
exit 1
}
######################################
function while_read_LINE
{
cat $FILENAME | while read LINE
do
echo "$LINE"
:
done
}
######################################
function while_read_LINE_bottom
{
while read LINE
do
echo "$LINE"
:
done < $FILENAME
}
######################################
function while_line_LINE_bottom
{
while line LINE
do
echo $LINE
:
done < $FILENAME
}
######################################
function cat_while_LINE_line
{
cat $FILENAME | while LINE=`line`
do
echo "$LINE"
:
done
}
######################################
function while_line_LINE
{
cat $FILENAME | while line LINE
do
echo "$LINE"
:
done
}
######################################
function while_LINE_line_bottom
{
while LINE=`line`
do
echo "$LINE"
:
done < $FILENAME
}
######################################
function while_LINE_line_cmdsub2
{
cat $FILENAME | while LINE=$(line)
do
echo "$LINE"
:
done
}
######################################
function while_LINE_line_bottom_cmdsub2
{
while LINE=$(line)
do
echo "$LINE"
:
done < $FILENAME
}
######################################
function while_read_LINE_FD
{
exec 3<&0
exec 0< $FILENAME
while read LINE
do
echo "$LINE"
:
done
exec 0<&3
}
######################################
function while_LINE_line_FD
{
exec 3<&0
exec 0< $FILENAME
while LINE=`line`
do
echo "$LINE"
:
done
exec 0<&3
}
######################################
function while_LINE_line_cmdsub2_FD
{
exec 3<&0
exec 0< $FILENAME
while LINE=$(line)
do
print "$LINE"
:
done
exec 0<&3
}
######################################
function while_line_LINE_FD
{
exec 3<&0
exec 0< $FILENAME
while line LINE
do
echo "$LINE"
:
done
exec 0<&3
}
######################################
########### START OF MAIN ############
######################################
# Test the Input
# Looking for exactly one parameter
(( $# == 1 )) || usage
# Does the file exist as a regular file?
[[ -f $1 ]] || usage
echo "\nStarting File Processing of each Method\n"
echo "Method 1:"
echo "\nfunction while_read_LINE\n" >> $TIMEFILE
echo "function while_read_LINE"
time while_read_LINE >> $TIMEFILE
echo "\nMethod 2:"
echo "\nfunction while_read_LINE_bottom\n" >> $TIMEFILE
echo "function while_read_LINE_bottom"
time while_read_LINE_bottom >> $TIMEFILE
echo "\nMethod 3:"
echo "\nfunction while_line_LINE_bottom\n" >> $TIMEFILE
echo "function while_line_LINE_bottom"
time while_line_LINE_bottom >> $TIMEFILE
echo "\nMethod 4:"
echo "\nfunction cat_while_LINE_line\n" >> $TIMEFILE
echo "function cat_while_LINE_line"
time cat_while_LINE_line >> $TIMEFILE
echo "\nMethod 5:"
echo "\nfunction while_line_LINE\n" >> $TIMEFILE
echo "function while_line_LINE"
time while_line_LINE >> $TIMEFILE
echo "\nMethod 6:"
echo "\nfunction while_LINE_line_bottom\n" >> $TIMEFILE
echo "function while_LINE_line_bottom"
time while_LINE_line_bottom >> $TIMEFILE
echo "\nMethod 7:"
echo "\nfunction while_LINE_line_cmdsub2\n" >> $TIMEFILE
echo "function while_LINE_line_cmdsub2"
time while_LINE_line_cmdsub2 >> $TIMEFILE
echo "\nMethod 8:"
echo "\nfunction while_LINE_line_bottom_cmdsub2\n" >> $TIMEFILE
echo "function while_LINE_line_bottom_cmdsub2"
time while_LINE_line_bottom_cmdsub2 >> $TIMEFILE
echo "\nMethod 9:"
echo "\nfunction while_read_LINE_FD\n" >> $TIMEFILE
echo "function while_read_LINE_FD"
time while_read_LINE_FD >> $TIMEFILE
echo "\nMethod 10:"
echo "\nfunction while_LINE_line_FD\n" >> $TIMEFILE
echo "function while_LINE_line_FD"
time while_LINE_line_FD >> $TIMEFILE
echo "\nMethod 11:"
echo "\nfunction while_LINE_line_cmdsub2_FD\n" >> $TIMEFILE
echo "function while_LINE_line_cmdsub2_FD"
time while_LINE_line_cmdsub2_FD >> $TIMEFILE
echo "\nMethod 12:"
echo "\nfunction while_line_LINE_FD\n" >> $TIMEFILE
echo "function while_line_LINE_FD"
time while_line_LINE_FD >> $TIMEFILE
wayy2008 回复于：2005-12-13 14:15:26
大美女，我以为是十二个命令呢，呵呵。
寂寞烈火 回复于：2005-12-13 14:16:44
厉害!!!
aibi 回复于：2005-12-13 16:06:38
后面好像还有这12种方法的效率的比较
hawkli 回复于：2005-12-13 16:06:53
强，似乎我只会2种。
:((((
panlm 回复于：2005-12-13 21:03:15
茴香豆的茴字有四种写法 ;)
zhuomingliang 回复于：2005-12-15 09:50:01
这个好像是一本书上的，前几天看了一下，然后就还给图书馆了
icesummit 回复于：2005-12-17 00:10:36
dbcat又是一个冉冉升起的美女星座啊。
hiei1321 回复于：2005-12-26 20:21:57
<<精通UNIX Shell脚本编程>>
寂寞烈火 回复于：2005-12-26 23:06:19
引用：原帖由 icesummit 于 2005-12-17 00:10 发表
dbcat又是一个冉冉升起的美女星座啊。
N天不见她了
welcome008 回复于：2005-12-27 11:43:45
好贴
dbcat 回复于：2005-12-27 13:38:18
引用：原帖由 寂寞烈火 于 2005-12-26 23:06 发表
N天不见她了
N=6
休假 
佛光普照 回复于：2005-12-28 09:06:31
这个KSH吗，还不是特别熟，不过既然是大美女的贴，就一定要顶！
RootZero 回复于：2006-04-20 16:23:26
不管是不是美女,顶下先
xy-coordinate 回复于：2007-05-24 09:07:26
for line in `cat $FILENAME`
do
echo $line
done
好象也行！？
|
