大家好：我在安装informix7.3时遇到麻烦，请高人指教
1、操作系统是aix4.3.3
2、数据库软件是informix7.3
问题：在安装完4gl、 sql、online以及相关网络环境配置后，onmonitor无法运行起来，具体错误代码如下：
exec(): 0509-036 Cannot load program onmonitor because of the following errors:
0509-130 Symbol resolution failed for /usr/lib/libc.a(aio.o) because:
0509-136 Symbol kaio_rdwr (number 0) is not exported from
dependent module /unix.
0509-136 Symbol listio (number 1) is not exported from
dependent module /unix.
0509-136 Symbol acancel (number 2) is not exported from
dependent module /unix.
0509-136 Symbol iosuspend (number 3) is not exported from
dependent module /unix.
0509-136 Symbol aio_nwait (number 4) is not exported from
dependent module /unix.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
请问问题处在那里，谢谢。
onlywxw 回复于：2003-08-30 14:30:16
那位高手能给予帮助，不胜感激!!!
onlywxw 回复于：2003-08-31 14:48:03
真的没有人遇到过此情况吗？我很苦恼，相信是个小问题，但就是不知问题在何处，求各位高手经过此处时，能烦劳给个回话，在下先谢过了！！！
（我试了试，4gl和isql都能用，只有online起不来，怪哉）
studio99 回复于：2003-08-31 20:30:26
oninit 数据库可以起来吗?
sunlan 回复于：2003-08-31 22:04:06
看了报错有两种感觉：
1。版本可能错了
2。有关环境变量设置可能又问题，比如LD_LIBRARY_PATH
admirer 回复于：2003-08-31 23:02:49
1.安装步骤可能有问题，比如是不是用informix的root用户安装的；
2.你的相关配置可能不配套；
3.环境设置没有做完。
最好将你的主要配置文件（onconfig，sqlhosts）贴出来看看！
onlywxw 回复于：2003-09-01 09:15:24
感谢几位的指导，现将sqlhosts和onconfig献上，请帮忙查阅：
sqlhosts：
online_150 onsoctcp 43p150 sqlexec_150
onconfig:
#**************************************************************************
#
# INFORMIX SOFTWARE, INC.
#
# Title: onconfig.std
# Description: Informix Dynamic Server Configuration Parameters
#
#**************************************************************************
# Root Dbspace Configuration
ROOTNAME rootdbs # Root dbspace name
ROOTPATH /dev/rdb1 # Path for device containing root dbspace
ROOTOFFSET 0 # Offset of root dbspace into device (Kbytes)
ROOTSIZE 2048000 # Size of root dbspace (Kbytes)
# Disk Mirroring Configuration Parameters
MIRROR 0 # Mirroring flag (Yes = 1, No = 0)
MIRRORPATH # Path for device containing mirrored root
MIRROROFFSET 0 # Offset into mirrored device (Kbytes)
# Physical Log Configuration
PHYSDBS rootdbs # Location (dbspace) of physical log
PHYSFILE 128000 # Physical log file size (Kbytes)
# Logical Log Configuration
LOGFILES 50 # Number of logical log files
LOGSIZE 15000 # Logical log size (Kbytes)
# Diagnostics
MSGPATH /usr/informix/online.log # System message log file path
CONSOLE /dev/null # System console message path
ALARMPROGRAM /usr/informix/etc/log_full.sh # Alarm program path
SYSALARMPROGRAM /usr/informix/etc/evidence.sh # System Alarm program path
TBLSPACE_STATS 1
# System Archive Tape Device
TAPEDEV /dev/rmt1 # Tape device path
TAPEBLK 16 # Tape block size (Kbytes)
TAPESIZE 4096000 # Maximum amount of data to put on tape (Kbytes)
# Log Archive Tape Device
LTAPEDEV /dev/null # Log tape device path
LTAPEBLK 16 # Log tape block size (Kbytes)
LTAPESIZE 4096000 # Max amount of data to put on log tape (Kbytes)
# Optical
STAGEBLOB # Informix Dynamic Server/Optical staging area
# System Configuration
SERVERNUM 0 # Unique id corresponding to a Dynamic Server instance
DBSERVERNAME online_150 # Name of default database server
DBSERVERALIASES # List of alternate dbservernames
NETTYPE soctcp,1,50,NET # Configure poll thread(s) for nettype
DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed env.
RESIDENT 0 # Forced residency flag (Yes = 1, No = 0)
MULTIPROCESSOR 0 # 0 for single-processor, 1 for multi-processor
NUMCPUVPS 1 # Number of user (cpu) vps
SINGLE_CPU_VP 1 # If non-zero, limit number of cpu vps to one
NOAGE 1 # Process aging
AFF_SPROC 0 # Affinity start processor
AFF_NPROCS 0 # Affinity number of processors
# Shared Memory Parameters
LOCKS 100000 # Maximum number of locks
BUFFERS 6000 # Maximum number of shared buffers
NUMAIOVPS 3 # Number of IO vps
PHYSBUFF 32 # Physical log buffer size (Kbytes)
LOGBUFF 32 # Logical log buffer size (Kbytes)
LOGSMAX 50 # Maximum number of logical log files
CLEANERS 1 # Number of buffer cleaner processes
SHMBASE 0x30000000 # Shared memory base address
SHMVIRTSIZE 8000 # initial virtual shared memory segment size
SHMADD 8192 # Size of new shared memory segments (Kbytes)
SHMTOTAL 0 # Total shared memory (Kbytes). 0=>;unlimited
CKPTINTVL 300 # Check point interval (in sec)
LRUS 8 # Number of LRU queues
LRU_MAX_DIRTY 60 # LRU percent dirty begin cleaning limit
LRU_MIN_DIRTY 50 # LRU percent dirty end cleaning limit
LTXHWM 50 # Long transaction high water mark percentage
LTXEHWM 60 # Long transaction high water mark (exclusive)
TXTIMEOUT 0x12c # Transaction timeout (in sec)
STACKSIZE 32 # Stack size (Kbytes)
# System Page Size
# BUFFSIZE - Dynamic Server no longer supports this configuration parameter.
# To determine the page size used by Dynamic Server on your platform
# see the last line of output from the command, 'onstat -b'.
# Recovery Variables
# OFF_RECVRY_THREADS:
# Number of parallel worker threads during fast recovery or an offline restore.
# ON_RECVRY_THREADS:
# Number of parallel worker threads during an online restore.
OFF_RECVRY_THREADS 10 # Default number of offline worker threads
ON_RECVRY_THREADS 1 # Default number of online worker threads
# Data Replication Variables
# DRAUTO: 0 manual, 1 retain type, 2 reverse type
DRAUTO 0 # DR automatic switchover
DRINTERVAL 30 # DR max time between DR buffer flushes (in sec)
DRTIMEOUT 30 # DR network timeout (in sec)
DRLOSTFOUND /usr/informix/etc/dr.lostfound # DR lost+found file path
# CDR Variables
CDR_LOGBUFFERS 2048 # size of log reading buffer pool (Kbytes)
CDR_EVALTHREADS 1,2 # evaluator threads (per-cpu-vp,additional)
CDR_DSLOCKWAIT 5 # DS lockwait timeout (seconds)
CDR_QUEUEMEM 4096 # Maximum amount of memory for any CDR queue (Kbytes)
# Backup/Restore variables
BAR_ACT_LOG /tmp/bar_act.log
BAR_MAX_BACKUP 0
BAR_RETRY 1
BAR_NB_XPORT_COUNT 10
BAR_XFER_BUF_SIZE 31
# Informix Storage Manager variables
ISM_DATA_POOL ISMData # If the data pool name is changed, be sure to
# update $INFORMIXDIR/bin/onbar. Change to
# ism_catalog -create_bootstrap -pool <new name>;
ISM_LOG_POOL ISMLogs
# Read Ahead Variables
RA_PAGES # Number of pages to attempt to read ahead
RA_THRESHOLD # Number of pages left before next group
# DBSPACETEMP:
# Dynamic Server equivalent of DBTEMP for SE. This is the list of dbspaces
# that the Dynamic Server SQL Engine will use to create temp tables etc.
# If specified it must be a colon separated list of dbspaces that exist
# when the Dynamic Server system is brought online. If not specified, or if
# all dbspaces specified are invalid, various ad hoc queries will create
# temporary files in /tmp instead.
DBSPACETEMP # Default temp dbspaces
# DUMP*:
# The following parameters control the type of diagnostics information which
# is preserved when an unanticipated error condition (assertion failure) occurs
# during Dynamic Server operations.
# For DUMPSHMEM, DUMPGCORE and DUMPCORE 1 means Yes, 0 means No.
DUMPDIR /usr/tmp # Preserve diagnostics in this directory
DUMPSHMEM 0 # Dump a copy of shared memory
DUMPGCORE 0 # Dump a core image using 'gcore'
DUMPCORE 0 # Dump a core image (Warning:this aborts Dynamic Server)
DUMPCNT 1 # Number of shared memory or gcore dumps for
# a single user's session
FILLFACTOR 90 # Fill factor for building indexes
# method for Dynamic Server to use when determining current time
USEOSTIME 0 # 0: use internal time(fast), 1: get time from OS(slow)
# Parallel Database Queries (pdq)
MAX_PDQPRIORITY 100 # Maximum allowed pdqpriority
DS_MAX_QUERIES 5 # Maximum number of decision support queries
DS_TOTAL_MEMORY 1048576 # Decision support memory (Kbytes)
DS_MAX_SCANS 20 # Maximum number of decision support scans
DATASKIP off # List of dbspaces to skip
# OPTCOMPIND
# 0 =>; Nested loop joins will be preferred (where
# possible) over sortmerge joins and hash joins.
# 1 =>; If the transaction isolation mode is not
# "repeatable read", optimizer behaves as in (2)
# below. Otherwise it behaves as in (0) above.
# 2 =>; Use costs regardless of the transaction isolation
# mode. Nested loop joins are not necessarily
# preferred. Optimizer bases its decision purely
# on costs.
OPTCOMPIND 0 # To hint the optimizer
ONDBSPACEDOWN 2 # Dbspace down option: 0 = CONTINUE, 1 = ABORT, 2 = WAIT
LBU_PRESERVE 0 # Preserve last log for log backup
OPCACHEMAX 0 # Maximum optical cache size (Kbytes)
# HETERO_COMMIT (Gateway participation in distributed transactions)
# 1 =>; Heterogeneous Commit is enabled
# 0 (or any other value) =>; Heterogeneous Commit is disabled
HETERO_COMMIT 0
# Optimization goal: -1 = ALL_ROWS(Default), 0 = FIRST_ROWS
OPT_GOAL -1
# Optimizer DIRECTIVES ON (1/Default) or OFF (0)
DIRECTIVES 1
# Status of restartable restore
RESTARTABLE_RESTORE off
蓝色键盘 回复于：2003-09-01 13:08:01
楼主的问题首先不在infomix sqlhost和onconfig.
是informix本身的问题，或者informix用户于OS库之间的环境没有设置好。
ifx 回复于：2003-09-01 13:17:05
mkdev -l aio0
smitty aio改成系统启动就是enable的即可。
或者用命令行修改
chdev -l aio0 -P -a autoconfig='available'
onlywxw 回复于：2003-09-01 13:31:57
感谢ifx的指导，一切ok！欢迎来我这里做客，请你吃烩面!
蓝色键盘 回复于：2003-09-01 13:51:09
ifx的回答，足够是精彩回帖了！
onlywxw 回复于：2003-09-01 14:06:13
蓝色键盘评价的也是言简意赅，一语道破，再次感谢各位的关照，谢谢!
|
